
Archimedes' screw
A helical screw turning inside an inclined tube that lifts water, grain or other material, and can also run in reverse to generate power.
- Year
- 250 BC
- Section
- Engineering and construction
History
The Archimedes' screw is a simple machine in which a helical surface turns inside a tilted tube, so that water or material at the bottom climbs from one turn to the next until it spills out at the top. It matters because it moves large volumes of water with modest energy and without complicated seals, and it is still used today in sewage plants, farms and small hydroelectric stations.
Before it appeared, people already lifted water with buckets on ropes, water wheels and chains of pots, but none of these was as continuous or as efficient at low heads and moderate flows. The earliest evidence points to Egypt, where the device was used to raise water from the Nile. Some versions were made of coiled tubes wrapped around a cylinder, while others carved a spiral groove into a solid wooden core and covered it with planks or metal sheets. Some researchers have proposed that such screws watered the Hanging Gardens of Babylon, but this remains unproven.
Archimedes of Syracuse is traditionally credited with the invention. The story, recorded by Posidonius, says he devised it during a visit to Egypt around 234 BC. However, there is no direct proof that he invented it, and many historians think he merely encountered or described a device that already existed. He never claimed it himself, and the attribution appears about two centuries later in the writings of Diodorus, so it should be treated with caution.
In the classical world, Greeks and Romans turned the screw by treading on the outer casing so that the whole assembly rotated as one piece. It spread through Greece and the Roman Empire for irrigation and for draining mines and ships, though in much of Europe it fell out of use by the third century AD. It returned during the Renaissance, when Leonardo da Vinci and Agostino Ramelli illustrated it in their books on machines, and in 1405 the German engineer Konrad Kyeser drew it with a crank, which made it far easier to operate.
In the following centuries, windmill-driven versions drained low-lying land in the Dutch Golden Age, and scientists began studying its performance. In the twentieth century, engineers such as Joan Muysken analysed its efficiency, and in 1991 a patent was filed for a version used as a turbine, running in reverse: falling water turns the screw, which drives a generator.
Its impact today is considerable. It is used in wastewater treatment, grain handling in silos, fish farms where it moves fish without injuring them, and small hydropower schemes that work with low drops in height. In 2002 the soil engineer John Burland used it to remove small amounts of waterlogged soil beneath the Tower of Pisa, which helped correct its tilt.
Timeline
- 250 BCThe earliest evidence of the water screw appears in Hellenistic Egypt.
- 234 BCPosidonius places Archimedes' visit to Egypt around this date, traditionally linked to the invention.
- 200 BCDiodorus credits Archimedes with the invention about two centuries later.
- 300By the end of the third century the screw had largely fallen out of use in much of Europe.
- 1405Konrad Kyeser illustrates the screw with a crank in his Bellifortis.
- 1991A patent is filed for the Archimedes screw turbine.
- 2002John Burland uses the principle to correct the tilt of the Tower of Pisa.
Trivia and anecdotes
A disputed origin
Many historians doubt that Archimedes invented the screw, and some think he only described it. The attribution came centuries after his time.
Powered by foot
Greeks and Romans turned the screw by treading on the outer casing, so that the whole assembly moved as a single piece.