
Electrostatic generator
A machine that produces static electricity at high voltage and very low current, using friction or induction.
- Year
- 1663
- Section
- Physics
History
An electrostatic generator is a machine that produces static electricity at high voltage and very low current. It matters because, for much of the eighteenth century, it was the main tool for studying electricity, and many devices still used in classrooms and laboratories descend from it.
Before these machines, static electricity was a puzzling curiosity, noticed since antiquity, with no theory to explain it and often confused with magnetism. By the end of the seventeenth century, people could already produce it by friction, but no continuous device could generate it in quantity. The first design usually cited is that of Otto von Guericke, around 1663, which used a sulphur globe that could be spun and rubbed by hand. It probably was not spun during use and was not really meant to make electricity, yet it inspired many later builders.
Isaac Newton then built his own primitive generator, using a glass globe instead of sulphur. Around 1706, Francis Hauksbee improved the design by spinning a glass sphere rapidly against a woollen cloth. Around 1730, Georg Matthias Bose added a collecting conductor, an insulated tube held by silk cords, and was the first to use a prime conductor: an iron rod held by a person standing insulated on a block of resin. In 1746, William Watson built a wheel that turned several globes at once, and Johann Heinrich Winckler replaced the hand with a leather cushion.
The Leyden jar encouraged further experiments. It is an early capacitor, with conductive coatings on both sides of the glass, able to store charge when connected to a source of electromotive force. Andreas Gordon replaced the globe with a glass cylinder, Benjamin Wilson added a collector of metal points around 1746, and in 1762 John Canton raised efficiency by dusting the cushion with a tin amalgam. In 1768, Jesse Ramsden built a plate version that became widely used.
In 1783, the Dutchman Martin van Marum designed a large machine with glass disks 1.65 metres across, able to produce voltage of either polarity. The following year John Cuthbertson built it under his supervision in Amsterdam, and it is now displayed at the Teylers Museum in Haarlem. Around 1787, Abraham Bennet described an electricity doubler that amplified a small charge through repeated manual steps with three insulated plates. In 1788, William Nicholson proposed a rotating doubler, regarded as the first rotating influence machine.
Influence machines work by electrostatic induction: a small initial charge is continually replenished and reinforced, so mechanical work becomes electrostatic energy. Over time they replaced friction machines. In 1831, Giuseppe Belli built the first symmetrical influence machine, with identical structures at both terminals. In 1840, Woodward's machine improved Ramsden's by placing the prime conductor above the disk.
The impact of these devices reaches the present. In classrooms they safely demonstrate electric forces and high-voltage effects. The potential differences they reach are used in X-ray tubes, particle accelerators, spectroscopy, medical applications, food sterilization and nuclear physics experiments. The Van de Graaff generator, and variants such as the Pelletron, remain in use in research.
Timeline
- 1663Otto von Guericke builds a primitive friction machine with a sulphur sphere.
- 1706Francis Hauksbee improves the design with a glass sphere spinning against wool.
- 1746William Watson builds a wheel that turns several globes at once.
- 1768Jesse Ramsden builds a plate version that becomes widely used.
- 1783Martin van Marum designs a large machine with 1.65-metre glass disks.
- 1788William Nicholson proposes a rotating doubler, the first rotating influence machine.
- 1840Woodward's machine improves Ramsden's by placing the prime conductor above the disk.