Newtonpedia ES
LM317
Image: Wikimedia Commons
Technology and communications · 1976

LM317

An integrated circuit that regulates an adjustable output voltage, from about 1.2 to 37 volts, with a maximum current of 1.5 A.

Year
1976
People involved
National Semiconductor, Bob Dobkin
Section
Technology and communications

History

The LM317 is an adjustable linear voltage regulator: a small integrated circuit that takes a variable or unstable input voltage and delivers a steady output that the user can set with just two external resistors. Its significance lies in how much it simplified power supply design, a task that previously required fixed-output regulators or more complicated discrete circuits.

Before it appeared, the most common voltage regulators had fixed outputs, such as the 78xx series for positive voltages, so each different voltage called for a different part. National Semiconductor first released the LM117, an adjustable regulator in the same family, followed by the LM337, which provided a negative output. The LM317 arrived in 1976, designed by Bob Dobkin while he worked at that company, and it quickly became one of the most popular adjustable regulators ever made.

The principle is straightforward. Inside the chip sits an internal reference of 1.25 volts, and the regulator always keeps that difference between its output pin and its adjustment pin. By connecting one resistor between those two pins and another between the adjustment pin and ground, the resulting voltage divider sets the output. Changing those resistor values therefore selects the voltage you want. The device has three pins: input, output and adjustment. Its quiescent current, the small current that flows out of the adjustment pin, is kept at or below 100 microamps, so in most practical cases it can be ignored in the calculations.

The chip includes protection against overload and overheating, which makes it forgiving of common wiring mistakes and misuse. Because it works with the difference between input and output, it can regulate high voltages as long as that difference stays below about 40 volts. It can also be configured to regulate current instead of voltage, by replacing the lower resistor of the divider with the load itself.

Its main limitation is heat. Like any linear regulator, it turns the surplus energy between input and output into heat, so large voltage differences often call for a heat sink. For higher currents there are alternatives, such as the LM350, which handles up to 3 amps, or an external power transistor. Today the LM317 remains common in chargers, laboratory power supplies, test equipment and many educational projects. Its design was also copied by manufacturers in other countries, including East German and Soviet equivalents.

Timeline

  • 1976Bob Dobkin designs the LM317 at National Semiconductor as an adjustable voltage regulator.
  • The LM117 and later the LM337, with a negative output, appear as early adjustable regulators in the family.
  • The LM317 becomes very popular, and equivalents are manufactured in East Germany and the Soviet Union.

Trivia and anecdotes

Just two resistors

Two external resistors are enough to set the output voltage, which greatly simplifies design compared with fixed regulators.

Other milestones in Technology and communications