Newtonpedia ES
Planer
Image: Wikimedia Commons
Engineering and construction · 1814

Planer

A machine tool that makes flat surfaces on a workpiece by moving a single-point cutting tool back and forth across it.

Year
1814
Section
Engineering and construction

History

A planer is a metalworking machine tool that produces flat surfaces by moving a single-point cutting tool in a straight line across a workpiece, or the workpiece under the tool. It matters because, before machines like it, making a large surface flat and accurate depended almost entirely on the skill of the person doing the work by hand. The same basic idea is used in wood planing, although the machines differ in size and use. In its basic operation, the piece is held on a table and the tool moves back and forth, cutting in one direction of travel and returning empty in the other.

Before the planer, flat surfaces were produced by hand, and the quality of the result depended on the worker. Early planing ideas were being tried in France in the 1750s, but little record of those experiments survives. In the late 1810s, a group of pioneers in various British workshops developed the planer into what we would now call a machine tool. Among those usually named are James Fox, George Rennie, Matthew Murray, Joseph Clement and Richard Roberts. The date given for the planer's appearance in this entry is approximately 1814, but the exact details remain disputed and will probably never be fully known. Much of the development work was never written down, partly because of proprietary secrecy and partly because nobody was keeping records for posterity. The account by Roe, published in 1916, is the most thorough reconstruction that could be assembled.

Workshops adopted the machine because it could remove a great deal of material in a single pass and produce surfaces with good accuracy, which was especially useful for large pieces. Over time, manufacturers developed different models. The double-housing design has supports on both sides of a long bed, while the open-side design has a support on one side only, allowing the workpiece to extend past the bed. Other machines are classified by the mechanism that drives the motion, such as crank-driven or gear-driven versions, or by how the machine works, such as machines with a moving head or those that cut on the return stroke. Size depends on the longest stroke possible. Metal planers range from tables of about 30 by 72 inches up to 20 by 62 feet, and weigh from roughly 20,000 pounds to over a million pounds.

Modern machines added pressurized circulating lubrication systems that deliver oil continuously to the parts most exposed to wear. Hard-to-reach places still need manual oiling by the operator.

Today, milling machines, broaching machines and grinding machines have largely replaced the planer as the tools of choice. Even so, planers remain in use in smaller tool and die shops that maintain and repair large stamping dies and plastic injection molds, and for squaring very large blocks of metal when other machines are unavailable or impractical. An old machine that still works and has long since been paid for holds a considerable cost advantage over a new one, which helps explain why older techniques often fade gradually in industry rather than disappearing all at once.

Timeline

  • 1750Early planing ideas are being tried in France, though few records survive.
  • 1814Approximate date of the planer's emergence as a machine tool, according to this entry.
  • 1916Roe publishes the most complete account he can reconstruct of the planer's development.

Trivia and anecdotes

Enormous machines

Metal planers can have tables up to 20 by 62 feet and weigh over a million pounds.

Old machine, new advantage

An old machine that still works and is paid off often costs less than buying a new one, which delays its disappearance.

Poorly documented origins

Part of the planer's development was never recorded, so credit among the pioneers is disputed.

Other milestones in Engineering and construction