Newtonpedia ES
Home › Transport › Puffing Billy
Puffing Billy
Image: Wikimedia Commons
Transport · 1813

Puffing Billy

The oldest surviving steam locomotive in the world, built in 1813 to haul coal on rails by relying on wheel-to-rail grip alone.

Year
1813
Section
Transport

History

Puffing Billy is the oldest steam locomotive still in existence anywhere in the world. It was built between 1813 and 1814 to haul coal wagons from the Wylam Colliery, near Newcastle upon Tyne, to the docks at Lemington in Northumberland. Its significance goes beyond its age. It was also the first commercial steam locomotive to rely entirely on adhesion, meaning the friction between its driving wheels and the rails, rather than on a toothed rack wheel that gripped a special track.

Steam traction on rails had already been attempted. In 1804 Richard Trevithick ran a locomotive near the Pen-y-darren ironworks in South Wales, which hauled five wagons of iron for about nine miles, but its excessive weight cracked the cast-iron rails and the idea was dropped for the time being. Other lines used the Blenkinsop system, in which a cog wheel meshed with a rack laid between the rails. In 1810 a major strike brought the Durham coalfield to a standstill. Christopher Blackett, owner of the Wylam pit, used the idle time to experiment with a locomotive-hauled tramway that would work by adhesion alone. The first trials used a simple hand-cranked wagon. By 1812 the team had a steam-powered prototype, a single-cylinder engine and boiler mounted on the test wagon. Little is known about its design. It is said to have been inspired by Trevithick's engine and may have been nicknamed Grasshopper, though none of this is certain. It was weak, and it stalled when overloaded or climbing a slope, yet it impressed Blackett enough to fund more engines.

Puffing Billy was one of three similar engines built by William Hedley, the resident engineer at the colliery, to replace the horses that pulled the tramway. Working with the enginewright Jonathan Forster and the blacksmith Timothy Hackworth, Hedley completed it in 1813. It introduced several novel features that Hedley patented. It had two vertical cylinders, one on each side of the boiler and partly enclosed by it, and a single crankshaft beneath the frame that drove gears connected to the wheels, improving grip. At around eight tons, its weight frequently broke the cast-iron rails of the day, which gave critics of locomotives plenty of ammunition. The remedy was to double the number of axles to spread the load. In 1815 it was rebuilt with ten wheels. It was never fast, reaching no more than about 5 mph, or 8 km/h.

The engine stayed in service until 1862, when Edward Blackett, the colliery owner, lent it to the Patent Office Museum in South Kensington, London, later known as the Science Museum. He subsequently sold it to the museum for £200, and it remains on display there. Its sister locomotive, the Wylam Dilly, is preserved at the National Museum of Scotland in Edinburgh. Two replicas exist: one, built in a Royal Bavarian State Railways workshop in 1906, is at the German Museum in Munich, and the other, at the Beamish Museum, first ran in 2006.

Its legacy is twofold. It was an important influence on George Stephenson, who lived nearby, and its success helped persuade other collieries in north-east England to adopt steam locomotives. It has also been suggested that its name survives in the English phrase like billy-o, although the origin of that expression is uncertain and several other explanations exist. Today it stands as a reminder of the early years of the railway. The principle it proved, that driven wheels can grip a smooth rail and pull a load, remains the basis of most train traction today.

Timeline

  • 1804Richard Trevithick tests a steam locomotive at Pen-y-darren in South Wales, which hauls iron wagons but cracks the rails.
  • 1810A major strike halts coal mining in Durham, and Christopher Blackett begins experimenting with adhesion-based traction.
  • 1812The first steam-powered prototype travelling engine is completed at Wylam Colliery.
  • 1813William Hedley, Jonathan Forster and Timothy Hackworth build Puffing Billy for Wylam Colliery.
  • 1815The engine is rebuilt with ten wheels to spread its weight more evenly.
  • 1830The track is relaid with stronger rails and the engine returns to its original configuration.
  • 1862Edward Blackett lends the locomotive to the Patent Office Museum in London, where it is later sold.
  • 2006The replica built for the Beamish Museum first runs.

Trivia and anecdotes

A tune named after it

In 1952 the British light-music composer Edward White wrote a melody named after the locomotive. It became ubiquitous in British media and was used on a BBC radio programme from 1952 to 1966.

A theme tune in the United States

In the United States, the same melody served as the theme for the children's programme Captain Kangaroo from 1955 to 1974.

Other milestones in Transport