Newtonpedia ES
Home › Energy › Ćuk converter
Energy · 1977

Ćuk converter

A DC-to-DC converter that can raise or lower the output voltage with inverted polarity, using a capacitor as its main energy store.

Year
1977
People involved
Slobodan Ćuk
Section
Energy

History

The Ćuk converter is an electronic circuit that turns one direct-current voltage into another, which can be higher or lower than the input. Its defining feature is that the output voltage has the opposite polarity to the input, which places it in the same family as the inverting buck-boost converter. Most converters store energy mainly in an inductor, a coil that resists changes in current; the Ćuk converter instead relies on a capacitor, a component that holds electric charge, as its central energy carrier. This makes it useful where a steady flow of current matters. It is named after Slobodan Ćuk of the California Institute of Technology, who first presented the design around 1977.

Before it appeared, DC converters were already common in electronic power supplies, but simple designs such as the buck and boost converters had drawbacks in ripple, the small fluctuations left on the output, and in current flow at the input or output. The Ćuk converter combines ideas from both. It uses two coils, two capacitors, a switch, usually a transistor, and a diode. In short time spans, each coil behaves like a current source that keeps the flow nearly constant. This step avoids connecting the capacitor straight to the voltage source, which would waste energy through the circuit's unavoidable resistance.

The circuit alternates between two states. When the switch is on, energy builds up in the coils; when it is off, the central capacitor charges or discharges and passes energy to the output. In steady operation, each coil must hold the same energy at the start and end of every cycle, which forces the average voltage across each coil to be zero. This condition gives an output-to-input ratio of D/(1−D), where D is the duty cycle, the fraction of each cycle during which the switch stays on. That is the same ratio found for the buck-boost converter.

Variants refine the basic idea. The two coils can share one magnetic core, which lowers output ripple and improves efficiency. Because power moves continuously through the capacitor, electromagnetic interference is reduced. Isolated versions add a transformer, and related designs such as the SEPIC and zeta converters share some principles while differing in polarity or ripple behaviour.

Today the Ćuk converter appears in power supplies, chargers, lighting systems and power electronics that need negative voltages or voltages different from the mains. Its lasting contribution was to show that a capacitor could serve as the core energy store, widening the options for efficient power conversion.

Timeline

  • 1977Slobodan Ćuk presents the converter design, with a patent for a DC-to-DC switching converter filed that year.
  • 1979Further patents by the same inventor, covering converters with reduced ripple and near-zero input and output current ripple, are filed.
  • Variants with a shared magnetic core reduce output ripple and improve efficiency compared with the original design.

Other milestones in Energy