Newtonpedia ES
Home › Energy › Dye-sensitized solar cell
Dye-sensitized solar cell
Image: Wikimedia Commons
Energy · 1991

Dye-sensitized solar cell

A solar cell that turns sunlight into electricity using a light-absorbing dye and a titanium dioxide semiconductor, with low cost and simple manufacturing.

Year
1991
Section
Energy

History

The Grätzel cell, also called the dye-sensitized solar cell, turns sunlight into electricity without relying on silicon, the material used in conventional solar panels. It matters because it combines low cost, simple production, and a light, flexible design that can be semi-transparent in some versions. This makes it a promising option where ordinary panels are impractical, such as window glass or lightweight surfaces. It is named after Michael Grätzel, one of the researchers who developed it.

Conventional solar cells rely on doped silicon, meaning silicon with deliberately added impurities so that one region has extra electrons and another has gaps where electrons are missing. The dye-sensitized design splits these jobs apart. A dye captures the light, while a semiconductor simply carries the resulting electric charge onward. Early hints of the idea date to the late 1960s, when researchers noticed that illuminated organic dyes could generate current at oxide electrodes inside electrochemical cells.

Around 1972, the principle of generating electricity with light-sensitive dyes was demonstrated in a study at the University of California, Berkeley. The researchers wanted to understand how plants turn light into chemical energy, so they used chlorophyll extracted from spinach. The experiment confirmed the idea, but the cell was unstable: the dye broke down over time, and this became the main obstacle for the following two decades. During that period, efficiency improved by optimizing the porosity of electrodes made from very fine oxide powders, yet the stability problem remained.

The modern version emerged in 1988, when the chemists Brian O'Regan and Michael Grätzel co-invented a cell with a titanium dioxide electrode. This inexpensive, non-toxic compound, already used as a base in paints, forms a highly porous layer with a huge internal surface. A dye that absorbs light is attached to it. The work continued at the École Polytechnique Fédérale de Lausanne (EPFL), where the first high-efficiency cell was published in 1991, a milestone that drew international attention to the technology.

The operation can be summarized in a few steps. The dye absorbs light and gives up an electron to the titanium dioxide. That electron travels through the network of particles to the transparent electrode and then, through an external circuit, powers a device. It returns through the back electrode, coated with platinum, and reaches a liquid electrolyte that gives the dye back the electron it had lost. The dye recovers its original state, and the cycle repeats as long as light falls on the cell.

Efficiency, meaning the share of sunlight converted into electricity, has been the weak point compared with silicon. In 2006 researchers reached 11 percent using very thin films of titanium dioxide nanoparticles, while traditional silicon panels operate between 14 and 17 percent. In 2013, scientists at EPFL reached 15 percent by using a perovskite-structured material as the light harvester and an organic hole-transporting material instead of the liquid electrolyte. The perovskite, however, changed its structure with temperature, making its performance unreliable. The fix was a two-step method: part of the material is first deposited into the pores of the scaffold, then exposed to the other component, which reacts almost instantly and allows much better control over the structure.

The biggest drawback remains the liquid electrolyte. At low temperatures it can freeze and damage the cell; at high temperatures it expands, making proper sealing difficult. It also contains volatile organic compounds, which are hazardous to people and the environment. Platinum and ruthenium, both expensive, have also proven hard to eliminate. Replacing the liquid with solidified crystals or molten salts has been tried, but these materials degrade and are not flexible.

The European Union's photovoltaic roadmap anticipated that such technologies would contribute significantly to renewable electricity generation by 2020. Today dye-sensitized cells occupy a specific niche, and they have inspired research into perovskites and platinum-free electrodes. Their main legacy is showing that solar energy can be captured with cheap and abundant materials, although balancing efficiency, cost and stability remains the central challenge.

Timeline

  • 1972At Berkeley, the principle of generating electricity with light-sensitive dyes is demonstrated, using spinach chlorophyll.
  • 1988Brian O'Regan and Michael Grätzel co-invent the modern version of the cell with a titanium dioxide electrode.
  • 1991EPFL publishes the first high-efficiency cell of this type.
  • 2006An efficiency of 11 percent is reached with thin films of titanium dioxide nanoparticles.
  • 2010Michael Grätzel receives the Millennium Technology Prize for this invention.
  • 2013Scientists at EPFL reach 15 percent efficiency using a perovskite material.

Trivia and anecdotes

Spinach chlorophyll

The early Berkeley experiments imitated plant photosynthesis and used chlorophyll extracted from spinach as the dye.

A paint ingredient

The titanium dioxide at the heart of the cell is so common that it is already widely used as a base for paint.

Homemade assembly

Its construction is simple enough that hobby kits exist for hand-building the cells.

Other milestones in Energy