Newtonpedia ES
Home › Computing › ENIAC
ENIAC
Image: Wikimedia Commons
Computing · 1945

ENIAC

The first general-purpose electronic digital computer that could be reprogrammed, completed in 1945 and built to calculate artillery firing tables.

Year
1945
Section
Computing

History

ENIAC, short for Electronic Numerical Integrator and Computer, was one of the first digital machines able to solve a wide range of numerical problems through reprogramming. Its importance lies in combining programmability with the speed of electronics in a single machine, something no earlier device had achieved. Its influence reaches the computers of today, although its specific design was soon superseded.

Before ENIAC, scientific and military calculation depended on people, called "computers", and on mechanical or electromechanical devices that were slow and limited to specific tasks. In June 1941, the United States Army's artillery department had graduate students compute firing tables using desk calculators and a differential analyzer, under the supervision of John Mauchly. These tables gave the gun angle for a given range, projectile, propellant charge and, at times, weather conditions. Every new weapon needed new tables, and the backlog kept growing.

Mauchly, who was not an electronics expert, began to wonder whether vacuum tubes could speed up the work. He teamed up with J. Presper Eckert, a research associate at the University of Pennsylvania, who led the hardware design while Mauchly supplied the overall concept. In August 1942 he proposed a fully electronic calculating machine. The Army accepted, giving the university a six-month research contract worth $61,700. The construction contract was signed on June 5, 1943, and secret work began the following month at the Moore School of Electrical Engineering under the code name "Project PX", with John Grist Brainerd as principal investigator. Herman Goldstine persuaded the Army to fund the project and oversaw it on its behalf.

The machine covered about 167 square metres and weighed roughly 27 tons. It held close to 17,500 vacuum tubes, glass valves that act as electronic switches and that replaced mechanical relays for their speed. It worked in decimal rather than binary, and could carry out about 5,000 additions or 300 multiplications per second. Programming it was a physical job: engineers plugged and unplugged cables on panels, much as telephone operators did, and setting up a new program could take days or even weeks. The room grew very hot, and a widely repeated story claims it caused blackouts in Philadelphia, though that tale is doubtful.

Assembly was finished in May 1945 and tests began at the university. Its first practical task ran on December 10, 1945, and the formal dedication took place in February 1946, when the press dubbed it a "giant brain". In December 1945 it was also used for calculations of thermonuclear reactions, supporting research on the hydrogen bomb. It was later moved to the Aberdeen Proving Ground in Maryland, where it operated until 1955.

Reliability was a serious problem. Several tubes burned out almost every day, leaving the machine idle for a good part of the time, and long-life tubes were not available until 1948. Engineers found that most failures happened when the machine was switched on or off, because of thermal stress, so they kept it running and cut failures to about one tube every two days. Eckert later recalled that each fault could be found in around fifteen minutes.

The biggest change came later. ENIAC could not store its programs, so in 1948 it was modified to accept instructions held in its function tables. This slowed it down and removed some of its parallel operation, but it cut reprogramming time from days to hours, a trade generally considered worthwhile. Meanwhile, ideas about stored programs were being developed in the EDVAC project, whose first draft was written by John von Neumann and inspired many later teams.

Its legacy today is mainly conceptual. ENIAC showed that general-purpose electronic computing was practical, and its designers learned lessons about memory, programming and reliability that shaped later machines. Every modern computer follows the stored-program model that ENIAC lacked at first, and many of its ideas survive in current architectures.

Timeline

  • 1941The US Army has graduate students compute artillery firing tables under John Mauchly's supervision.
  • 1943The construction contract is signed and Project PX begins in secret at the University of Pennsylvania.
  • 1945The machine is completed and in December is used for thermonuclear reaction calculations.
  • 1946ENIAC is formally presented to the public at the University of Pennsylvania.
  • 1947The machine is moved to the Aberdeen Proving Ground in Maryland.
  • 1948It is modified to run stored programs and more durable tubes become available.
  • 1955ENIAC is retired after almost a decade of service.

Trivia and anecdotes

Philadelphia blackouts

It is often repeated that the machine caused power cuts in the city because of its electricity use, but the story is doubtful and poorly documented.

The forgotten programmers

Six women programmed ENIAC and for decades received little recognition; some were not invited to the machine's formal dedication.

Other milestones in Computing