Newtonpedia ES
Home › Energy › Francis turbine
Francis turbine
Image: Wikimedia Commons
Energy · 1849

Francis turbine

A water turbine that turns the energy of moving water into rotation, widely used to generate electricity in hydroelectric plants.

Year
1849
People involved
James Bicheno Francis
Section
Energy

History

The Francis turbine is a machine that turns the energy of moving water into rotation. Water flows inward through the curved blades of a wheel-like runner, and the spinning shaft drives an electric generator. Its importance lies in its flexibility and efficiency: it can be designed for very different water heights and flows, which is why it is the most widely used water turbine in the world, mainly in hydroelectric plants.

Before it appeared, water wheels had powered mills for more than a thousand years, but they wasted much of the water's energy. During the nineteenth century, better turbines began to replace them and to compete with steam engines wherever a fall of water was available. In 1826 the French engineer Benoît Fourneyron built an outward-flow turbine reaching about 80 percent efficiency, in which water was aimed tangentially at the runner so that it spun. Around 1820, Jean-Victor Poncelet had designed an inward-flow turbine based on similar principles, and in 1838 S. B. Howd received a United States patent for a comparable design.

In 1848 James B. Francis, then head engineer of a canal and lock company in Lowell, Massachusetts, a textile city powered by water wheels, improved these designs. His contribution was as much methodical as mechanical. He applied scientific principles and systematic testing, and developed mathematical and graphical calculation methods that let engineers predict how a turbine would behave and match it to the flow and pressure of a particular site. His turbine reached about 90 percent efficiency, very high for its day. The modern runner took roughly seventy years to mature, and around 1920 the design came to be known by his name.

The machine works on a simple principle. Pressurised water enters a spiral casing that distributes it evenly around the runner. Before reaching the blades, adjustable guide vanes direct the flow and control how much water passes, so the power output can follow changes in electricity demand. The water pushes the runner blades, which turn a shaft connected to a generator. Finally, a draft tube, which widens toward its outlet, slows the water as it leaves and recovers part of the energy it still carries.

Once electric generators appeared in the late 1800s, turbines became a natural way to produce power wherever water could fall. Today large Francis turbines are designed individually for each plant, usually reaching over 90 percent efficiency, and they operate with heads from a few metres to several hundred metres. Their outputs range from a few kilowatts to 1000 MW. They are also used in pumped storage: during periods of low demand the turbine runs as a pump, lifting water to an upper reservoir, and later releases that water to generate electricity when demand peaks. Their limits are known. They are not recommended for heads above about 800 metres, their efficiency drops when the flow varies greatly, and engineers must control cavitation, the formation of vapour bubbles that erode metal surfaces.

Timeline

  • 1820Jean-Victor Poncelet designs an inward-flow turbine based on similar principles.
  • 1826Benoît Fourneyron develops an outward-flow turbine with an efficiency of about 80 percent.
  • 1838S. B. Howd obtains a United States patent for a similar design.
  • 1848James B. Francis improves earlier designs and reaches an efficiency of 90 percent.
  • 1920Around this date the design begins to be known as the Francis turbine.

Trivia and anecdotes

A city of water-powered mills

Francis worked in Lowell, a textile city whose factories ran on water wheels, an environment that let him see at first hand the limits of those machines.

A name that came late

The design is credited to Francis from 1848, but the name Francis turbine only became common around 1920, when the runner shape had matured.

People involved

Other milestones in Energy