Newtonpedia ES
Home › Energy › Savonius wind turbine
Savonius wind turbine
Image: Wikimedia Commons
Energy · 1922

Savonius wind turbine

A vertical-axis wind turbine that uses the uneven drag of wind on S-shaped scooped blades to turn a shaft.

Year
1922
People involved
Sigurd Savonius
Section
Energy

History

The Savonius rotor is a vertical-axis wind turbine that converts the force of the wind into rotational motion. Its principle is simple: the wind pushes harder on the scoop moving with the breeze than on the one moving against it, and that difference makes the whole assembly spin. It matters mainly because it is cheap, simple and easy to use, even though it is not the most efficient design.

Centuries before Savonius, European inventors had tried curved blades on vertical shafts. The earliest known mention comes from Fausto Veranzio, a bishop and engineer who described several such machines in his 1616 book Machinae novae. None of these earlier designs matched the development later reached by the Finnish engineer Sigurd Johannes Savonius. He filed his first patent in 1922 and received one in 1926, and he tested his rotor on small rowing boats on lakes in Finland. Two further United States patents followed, filed in 1925 and 1928.

The turbine has two or three spoon-shaped blades which, seen from above, form an S-shaped cross section. The scoop moving against the wind meets less drag than the one moving with it, so the rotor turns. This simple drag principle has a cost: a Savonius turbine captures far less of the wind's energy than a lift-type turbine of similar size. In exchange, it needs no alignment with the wind, starts turning in gentle breezes, copes well with turbulence and runs quietly.

Its most widespread use is ventilation rather than electricity. In the 1920s the German aircraft engineer Anton Flettner developed the Flettner ventilator, which uses a Savonius rotor to drive an extractor fan and can still be seen on the roofs of vans and buses. Most anemometers that measure wind speed are also Savonius-type devices, since efficiency does not matter for that task. Much larger versions have powered deep-water buoys and neutrino detectors in Antarctica.

Today its significance lies in low-power, low-maintenance applications rather than large-scale energy production. Its simple design remains a reference point in research on vertical-axis wind power.

Timeline

  • 1616Fausto Veranzio describes several vertical-axis turbines with curved blades in his book Machinae novae.
  • 1920Anton Flettner develops the Flettner ventilator, which uses a Savonius rotor to drive an extractor fan.
  • 1922Sigurd J. Savonius presents his S-shaped vertical-axis turbine.
  • 1926Savonius receives the patent for his design.
  • 1928Savonius files a second United States patent, after the one filed in 1925.
  • 1978Felix van König confirms the Magnus effect in the Savonius rotor.

Trivia and anecdotes

A barrel as a rotor

According to the calculations in the reference material, a rotor made from the two halves of a roughly 200-litre oil barrel can produce about 120 watts in a 10 m/s wind.

Spinning adverts

In Europe, small Savonius turbines have been used as animated advertising signs, where the spin draws attention to the product.

People involved

Other milestones in Energy